Dell Vostro 220s Service Manual

Also see for Vostro 220 - Vostro 220 Slim Desktop Computer: User guide Setup and features information Setup and quick reference guide System information guide Rack Installation Guide

Contents

Dell Vostro 220s Service Manual Manual pdf 87 page image

Boot Up NumLockStatus Off; On (On by default)Quiet Boot Enabled; Disabled (Enabled by default)Boot ConfigurationHard Disk BootPriority Used to set the device priority of hard drives. The items displayed are dynamically updated accordingto the hard drives detected.Removable DrivesBoot Priority Used to set the device priority of removable devices such a media card readers. The items displayedare dynamically updated according to the removable devices connected.First Boot Device Removable; Hard Disk; CDROM; USB-CDROM; Legacy LAN; Disabled (Removable by default)Second BootDevice Removable; Hard Disk; CDROM; USB-CDROM; Legacy LAN; Disabled (Hard disk by default)Third Boot Device Removable; Hard Disk; CDROM; USB-CDROM; Legacy LAN; Disabled (CD-ROM by default)Boot MenuSecurity Enabled; Disabled (Disabled by default)Advanced Chipset FeaturesInit DisplayFirst Onboard, PCI, PCI-Express (PCI-Express by default)Integrated PeripheralsUSB Controller Enabled or Disabled (Enabled by default)Onboard AudioConnector Enabled or Disabled (Enabled by default)Onboard LANConnectorEnabled or Disabled (Enabled by default)Onboard LAN BootROM Enabled or Disabled (Disabled by default)Serial Port OFF, COM 1, AUTO, COM 3 (AUTO by default)Power Management SetupACPI Suspend Type S1(POS); S3(STR) (S3(STR) by default)AC Recovery Power Off, Power On, Last State (Power Off by default)Remote Wake Up Enabled; Disabled (Enabled by default)Auto Power On Enabled; Disabled (Disabled by default)Auto Power On Date 0Auto Power On Time 0:00:00Load DefaultsLoad OptimalDefaultsResets CMOS defaults to factory install values.Boot SequenceThis feature allows you to change the boot sequence for devices.Option SettingsDiskette Drive — The computer attempts to boot from a floppy drive (if installed). If the floppy disk in the drive is notbootable, if no floppy disk is in the drive, or if there is no floppy drive installed in the computer, the computergenerates an error message.Hard Drive — The computer attempts to boot from the primary hard drive. If no operating system is on the drive, thecomputer generates an error message.