Troubleshooting Your TV 37Poor picture quality when using adevice connected to the NTSC(coaxial)connector1 Ensure TV is selected as the input source in the Input Selectmenu. See "Input Select" on page 28 for more information.2 Press Menu button on the remote control, select Setup, andthen select Channel Setup. This resets the channels on your TV.3 Check the aspect ratio settings in the TV Menu. Press the Menubutton on the remote control and select Size. For moreinformation on using the TV Menu, see "Using the TV Menu"on page 27.4 Reset the original factory defaults. Press Menu button on theremote control, select Setup, and then select Factory Reset.5 Adjust the color temperature. Press Menu button on the remotecontrol, select Picture Settings, and then select ColorTemperature.6 The problem may be with your device, contact your serviceprovider.Nothing appears on my TV 1 Ensure the TV is turned on.2 Verify that all the cables are properly connected to the TV,including the power cable.3 Check to see if there is a blue or amber light on the lower,right-hand corner of the TV. A blue light indicates the TV is on.An amber light, means the TV is in power save mode.4 Ensure the proper source is selected in the Input Select menu.See "Input Select" on page 28 for more information.5 Reconnect any devices that are currently connected to the TV. Ifyou are using multiple devices, connect and test one device at atime.6 Connect another device that you know is working properly.7 Reset the original factory defaults. Press Menu button on theremote control, select Setup, and then select Factory Reset.Problem Possible Solution
