Dell Wyse Enhanced Ubuntu Linux T50 User Manual

Also see for Wyse Enhanced Ubuntu Linux T50: Quick start guide Quick start guide Quick start guide Quick start guide Quick start guide

Contents

Configuring Connections 39NetworkUse the Network tab to configure the network settings:• Server, Application Name, or Storefront - Select an option for making theconnection.• Description - Enter a name/label for the connection.• Network Protocol - Select a network protocol.• Browser Server - Enter the Browser Server name (this can be a list of server nameswith each name separated by a semi-colon).TIP: You do not need to enter a browser server name if you do not want to connectto either a published application or a server by name. In addition, generating an ICAconnection to a server using a server name in the Server text box for the connectiondoes not require a Browser Server address, as long as the DNS information isproperly entered.• Server, Application Name, or Store Name - Select a Server from the Server list, aPublished Application from the Application Name list, or a Store Name from theStore Name list. If needed, click Refresh to refresh the list of servers or publishedapplications. NOTE: With a Storefront option you can also add a store (click AddStore and follow the wizard).TIP: You can enter the IP address of the target server as long as there is no need toresolve a name.ConnectionUse the Connection tab to configure the connection settings:• Enable compression - Enables compression.• Low bandwidth - Enables low-bandwidth optimization.• Enable sound - Enables sound.• Ping before connect - Pings the connection to see if it is reachable before theconnection is attempted.• Enable Middle Button Paste - Enables middle button paste for the mouse.• Encryption - Select an encryption type (default is Basic).WindowUse the Window tab to select the Window Colors and the Window Size you want, andto disable the panel (if you want the window to appear without the panel while usingthe connection).ApplicationUse the Application tab to enter the command line and Working Directory of theapplication (if you selected the Published Application option on the Network tab):• Command Line - Enter the command line for the program on the server.• Working Directory - Enter the working directory for the program.