Dell Wyse Enhanced Ubuntu Linux T50 User Manual

Also see for Wyse Enhanced Ubuntu Linux T50: Quick start guide Quick start guide Quick start guide Quick start guide Quick start guide

Contents

Configuring Connections 49VMware View ClientUse the VMware View Client Settings dialog box (click VMware View Client) to setVMware View Client connection configurations. After configuring, be sure to click OK.NetworkUse the Network tab to configure the network settings:• Description - Enter a name/label for the connection.• Host - Enter the VMware View Server location (either host name, a full URLincluding the root path, or an IP Address).• Port - Enter the port of the host.• Use Secure Connection (SSL) - Select to use an SSL connection.• Enable interactive mode - Enables interactive mode.Secure PreferencesUse the Secure Preferences tab to select the option you want that determines how theclient will proceed when it cannot verify that your connection to the server is secure.CAUTION: It is not recommended that you change this setting unless instructed to doso by your system administrator.ConnectionUse the Connection tab to configure the connection settings:• Protocol - Select a network protocol.• Disable 32 bit color on RDP - You can select this check box if you selected RDP forthe Protocol.• Ping Before Connect - Pings the connection to see if it is reachable before theconnection is attempted.• Connect automatically after login - Enables an automatic connection aftersuccessful login to the thin client.• Auto Reconnect - Reconnects automatically after a disconnection occurs.• Delay before retrying - Select the amount of time to delay the reconnectionattempt after a disconnection occurs.