48 Chapter 4SSHUse the SSH Configuration dialog box (click SSH) to set SSH connectionconfigurations. After configuring, be sure to click OK.TIP: X forwarding/tunneling is automatic and allows you to execute remote Xapplications.NetworkUse the Network tab to configure the network settings:• Description - Enter a name/label for the connection.• Host - Enter a host name or IP address.• Remote Username - Enter a username.• Remote Command - Enter the command to execute on the server.ConnectionUse the Connection tab to configure the connection settings:• Auto Connect - Starts the connection automatically after system startup.• Ping Before Connect - Pings the connection to see if it is reachable before theconnection is attempted.• Auto Reconnect - Reconnects automatically after a disconnection occurs.• Delay before retrying - Select the amount of time to delay the reconnectionattempt after a disconnection occurs.
