100 | Replacing the Camera ModuleReplacing the Camera ModuleWARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 11. After working inside your computer, follow the instructions in "AfterWorking Inside Your Computer" on page 13. For additional safety best practicesinformation, see the Regulatory Compliance Homepage atdell.com/regulatory_compliance.Procedure1 Align the tabs on the camera module with the slots on the camera assembly andsnap the camera module into place.2 Connect the camera cable to the camera assembly and place the camera on thedisplay bezel.3 Replace the screws that secure the camera assembly to the display bezel.Postrequisites1 Follow the instructions from step 3 to step 17 in "Replacing the Display Panel" onpage 96.2 Replace the processor heat-sink fan. See "Replacing the Processor Heat-Sink Fan"on page 52.3 Replace the inner frame. See "Replacing the Inner Frame" on page 50.4 Replace the system-board shield. See "Replacing the System-Board Shield" onpage 32.5 Replace the I/O panel. See "Replacing the I/O Panel" on page 41.6 Replace the stand. See "Replacing the Stand" on page 22.7 Replace the trim cover. See "Replacing the Trim Cover" on page 20.8 Replace the back cover. See "Replacing the Back Cover" on page 18.9 Follow the instructions in "After Working Inside Your Computer" on page 13.
