30 | Replacing the Memory Module(s)Replacing the Memory Module(s)WARNING: Before working inside your computer, read the safety informationthat shipped with your computer and follow the steps in "Before You Begin" onpage 11. After working inside your computer, follow the instructions in "AfterWorking Inside Your Computer" on page 13. For additional safety best practicesinformation, see the Regulatory Compliance Homepage atdell.com/regulatory_compliance.Procedure1 Align the notch on the memory module with the tab on thememory-module connector.2 Slide the memory module firmly into the connector at a 45-degree angleand press the memory module down until it clicks into place.NOTE: If you do not hear the click, remove the memory module and reinstall it.3 Slide the tabs on the memory-module shield into the slots on thesystem-board shield and slide the memory-module toward the top of thecomputer.4 Replace the screw that secures the memory-module shield to thesystem-board shield.Postrequisites1 Replace the back cover. See "Replacing the Back Cover" on page 18.2 Follow the instructions in "After Working Inside Your Computer" on page 13.1 tab 2 memory-module connector3 memory module132
