106 Removing and Installing PartsReplacing the Drive Panel1 Follow the procedures in "Before You Begin" on page 75.2 Remove the computer cover (see "Removing the Computer Cover" on page 76).3 Align the drive panel tabs with the side-door hinges.4 Rotate the drive panel toward the computer until it snaps into place on the drive panel.5 Replace the computer cover (see "Replacing the Computer Cover" on page 127).See the documentation that came with the drive for instructions on installing any software required fordrive operation.Floppy DriveCAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the ProductInformation Guide.Removing a Floppy Drive1 Follow the procedures in "Before You Begin" on page 75."2 Remove the computer cover (see "Removing the Computer Cover" on page 76).3 Remove the drive panel (see "Removing the Drive Panel" on page 105).1 drive release latch 2 drive panel 3 drive panel tabs213book.book Page 106 Friday, October 27, 2006 4:02 PM
