Replacing the wireless cardWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps in Beforeworking inside your computer. After working inside your computer, followthe instructions in After working inside your computer. For more safety bestpractices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.ProcedureCAUTION: To avoid damaging the wireless mini-card, do not place anycables under it.1 Connect the antenna cables to the wireless mini-card.The following table provides the antenna-cable color scheme for the wirelessmini-card supported by your computer.Connectors on the wireless card Antenna-cable colorMain (white triangle) WhiteAuxiliary (black triangle) Black2 Slide the wireless-mini card bracket into the wireless card.3 Align the notch on the wireless mini-card with the tab on the wireless mini-cardconnector.4 Press the other end of the wireless mini-card down and replace the screw thatsecures the wireless mini-card to the system board.Post-requisitesReplace the computer cover.38
