Removing the front USB-panelWARNING: Before working inside your computer, read the safetyinformation that shipped with your computer and follow the steps in Beforeworking inside your computer. After working inside your computer, followthe instructions in After working inside your computer. For more safety bestpractices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.Prerequisites1 Remove the computer cover.2 Remove the front bezel.ProcedureCAUTION: Be extremely careful while sliding the front USB-panel out of thecomputer. Carelessness may result in damage to the cable connectors andthe cable routing clips.NOTE: Note the routing of all cables as you remove them so that you canre-route them correctly after you replace the front USB-panel.1 Press the securing clip and disconnect the front USB-panel cables from thesystem board. For more information, see "System-board components".2 Remove the screw that secures the front USB-panel to the front panel.3 Slide the front USB-panel down and pull it away from the chassis.77