Removing the solid-state driveWARNING: Before working inside your computer, read the safety information that shipped with your computer and follow thesteps in Before working inside your computer. After working inside your computer, follow the instructions in After working insideyour computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive.CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state.Topics:• Prerequisites• ProcedurePrerequisites1 Remove the right-side cover.2 Remove the full-length graphics card (if installed).Procedure1 Remove the screw that secures the solid-state drive to the system board.2 Slide and lift the solid-state drive off the system board.For more information, see “System-board components”.1836 Removing the solid-state drive
