Removing the power-button moduleWARNING: Before working inside your computer, read the safety information that shipped with your computer and follow thesteps in Before working inside your computer. After working inside your computer, follow the instructions in After working insideyour computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.Topics:• Prerequisites• ProcedurePrerequisites1 Remove the right-side cover.2 Remove the optical drive.3 Remove the front bezel.4 Remove the top cover.5 Follow the procedure from step 1 to step 2 in “Removing the power-supply unit”.ProcedureNOTE: Note the routing of the cable as you remove it so that you can reroute it correctly after you replace the power-buttonmodule.1 Disconnect the power-button module cable from the system board.For more information, see “System-board components”.2 Note the power-button module cable routing and remove the cable from the routing guides next to the system board on the chassis.3 Remove the screw that secures the power-button module and lift the power-button module from the chassis.4 Remove the cable from the slot on top of the chassis.3060 Removing the power-button module
