Replacing the full-length graphics cardsWARNING: Before working inside your computer, read the safety information that shipped with your computer and follow thesteps in Before working inside your computer. After working inside your computer, follow the instructions in After working insideyour computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.Topics:• Procedure• Post-requisitesProcedure1 Align the full-length graphics card with the slot on the system board.2 Place the card into the slot and press down firmly until the full-length graphics card snaps into place.3 Connect the power cables to the full-length graphics card.4 Slide the tab on the full-length graphics-card bracket into the slot on the chassis and snap it into place.Post-requisites1 Follow the procedure from step 9 to step 10 in “Replacing the power-supply unit”.2 Replace the right-side cover.2754 Replacing the full-length graphics cards
