Replacing the Display Assembly1. Follow the instructions in Before You Begin.2. Place the palm-rest assembly on the display assembly and route the display cable, camera cable, and Mini-Card antenna cables through the routingguides.3. Replace the six screws that secure the display assembly to the palm-rest assembly.4. Follow the instructions from step 2 to step 12 in Replacing the System Board.5. Replace the battery (see Replacing the Battery).6. Replace the base cover (see Replacing the Base Cover).Display BezelRemoving the Display Bezel1. Follow the instructions in Before You Begin.2. Remove the display assembly (see Removing the Display Assembly).3. Using your fingertips gently peel off the display bezel surround off the display bezel.4. Remove the four screws that secure the display bezel to the display back cover.5. Lift the display bezel off the display assembly.CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so mayresult in damage to the computer.CAUTION: The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.NOTE: The display bezel surround cannot be reused. If either the display panel or the display bezel is replaced, use the display bezel surround providedin the kit.1 display bezel surround