20 Internal Card With Bluetooth® Wireless TechnologyReplacing the Bluetooth ModuleCAUTION: Before you perform any of the procedures in this section, follow the safety instructions in theProductInformation Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodicallytouching an unpainted metal surface (such as the back panel) on the computer.1 Follow the instructions in "Preparing to Work Inside the Computer" on page 7.2 Follow the instructions in "Removing the Bluetooth Module" on page 17, as applicable.3 Connect the new Bluetooth module to the connector cable.4 Place the Bluetooth module in its compartment.5 Replace the M2 x 3-mm screw to secure the Bluetooth module to the base of the computer.6 Replace the modem/Mini PCI/wireless cover and tighten the screws.1 Bluetooth module 2 Bluetooth module connector 3 Bluetooth connector cable231
