Hard Drive 23Replacing the Hard DriveCAUTION: Before you perform any of the procedures in this section, follow the safety instructions in theProductInformation Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodicallytouching an unpainted metal surface (such as the back panel) on the computer.1 Follow the instructions in "Preparing to Work Inside the Computer" on page 7.2 Follow the instructions in "Removing the Hard Drive" on page 21.NOTICE: Use firm and even pressure when sliding the hard drive into place. Excessive force may result in damageto the connector.3 Place the new hard drive into the bay, then slide it away from the screw holes into the connector untilit is fully seated.4 Replace the hard drive cover and tighten the screws.5 Install the operating system for your computer, if necessary (see "Restoring Your Operating System" inyour Owner’s Manual).6 Install the drivers and utilities for your computer, if necessary (see "Reinstalling Drivers and Utilities"in your Owner’s Manual).Returning a Hard Drive to DellReturn your hard drive to Dell in the replacement drive’s foam packaging. Otherwise, the hard drive may bedamaged in transit.NOTE: The hard drive should be inserted in the replacement drive’s antistatic bag before being placed in the foampackaging.1 hard drive 2 pull tab