Dell XPS M140 Service Manual

Also see for XPS M140: Owner's manual Service manual

Contents

Display Assembly and Display Latch 61Replacing the Display PanelCAUTION: Before you perform any of the procedures in this section, follow the safety instructions in theProductInformation Guide.NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodicallytouching an unpainted metal surface (such as the back panel) on the computer.1 Follow the instructions in "Preparing to Work Inside the Computer" on page 72 Follow the instructions in "Removing the Display Panel" on page 59.3 Connect the top flex-cable connector to the display locking connector on the new display panel.4 Connect the bottom flex-cable connector to the inverter connector.NOTICE: To avoid damaging the display cover and/or the display panel, ensure that the guide posts at the top ofthe display panel are properly aligned with the corresponding notches on the display cover.5 Gently place the display panel inside the display cover.6 Replace the six M2 x 3-mm screws (three on each side) to secure the display panel to the display cover.7 Replace the display bezel (see "Replacing the Display Bezel" on page 58).8 Replace display assembly (see "Replacing the Display Assembly" on page 56).1 back of display panel 3 metal clamps 5 inverter connector2 top flex-cable connector 4 bottom flex-cable connector21543