Delphi SA10034-11B1 Owner's Manual
                   | |
Contents
| 
Basic OperationsCD/MP3, AM/FM, CLOCK MODULEPlaying Audio CD or MP3 FilesThe Delphi CD Audio System can play CDs, CD-Rs,and CD-RWs recorded in Compact Disc Digital Audio(CD-DA) format, as well as MP3 files recorded in CD-ROM format**. Playback may vary depending onthe quality of the compact disc and the condition ofthe recording device.To play compact discs:1. Rotate the central unit so that the CD panel facesforward. Be sure to follow the arrows whenrotating the unit. Complete the rotation until theunit locks in position. CAUTION: Do not useexcessive force, which could damage the unit.2. Press “Power” on the CD panel or remote control.3. Holding the central unit steady, open thecompartment lid and insert a compact disc inthe CD player.4. Close the CD compartment lid.Before playing a compact disc, your Delphi CDAudio System reads all file and directory informa-tion on the CD. Depending on file structure, this maytake more than one minute. “READING” is displayedduring this time. The first track on the CD will beginto play automatically. At the same time, informationabout the disc will display.Figure 6: Initial CD DisplayFigure 7: Initial MP3 DisplayProper Care and Storage of CompactDiscsScratches, dirt, and fingerprints on the surface ofcompact discs may cause tracking errors. For opti-mum sound quality:• Compact discs should be cleaned before playing;using a dry, soft cloth, wipe from the center out,never in a circular motion• Do not clean compact discs with benzene orother solvents, commercially available cleaners,or antistatic spray intended for vinyl LPs• Store CDs in their cases when not playing• Do not allow CDs to be exposed to direct sun-light or heat sources• Do not tape paper or apply stickers to CDsCD/MP3 Programming OptionsYour Delphi CD Audio System lets you program theplaying order of up to 30 CD/MP3 tracks or MP3directories.CD Program PlayTo program the playing order of tracks on a CD:1. In CD/MP3 mode, stop playback.2. Press “Memory” on the CD panel or “mem/prog”on the remote. “P01_ _” will flash on the LCD.3. Press “Next” or “Prev” on the CD panel or thecategory keys or numeric keys on the remote toselect a track number.4. Press “Memory” or “mem/prog” to confirm.5. “P02_ _” will flash. Continue Steps 3 and 4 untilall tracks have been selected (up to a maximumof 30).6. Press “Play” on the CD panel or the enter key onthe remote to play.Figure 8: Display During CD ProgrammingMP3 Program PlayTo program the playing order of tracks or directorieson an MP3:1. In CD/MP3 mode, stop playback.2. Press “Memory” on the CD panel or “mem/prog”on the remote. “P01_ _ _-_ _ _” will display andthe first three _ _ _ (dashes in the register) willflash on the LCD.3. Press “Next” or “Prev” on the CD panel or thecategory keys or numeric keys on the remote toselect a directory.4SECT ION 3**Recording MP3 files for the Delphi CD Audio System may require theuse of “Full Version” CD-burning software packages (e.g., EasyCDCreator™ or Nero™).CD15 TRK72:46CDP01-XXMP322 DIR185 TRKTotal track numbersTotal playback timeTotal directory numbersTotal track numbersTrack numberProgram number |
Related manuals for Delphi 10034 - Sa Skyfi Cd Audio System
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine