Delta AHCPU560-EN2 Series Operation Manual

Also see for AH10EN-5A Series: Hardware manual

Contents

Delta AHCPU560-EN2 Series Operation Manual Manual pdf 116 page image

Et her N et / I P O per ati on Manual8- 24_8InstanceAttribute Name AccessRule Data Type Values Descriptioncannot be sent due to MAC layer errorsCarrier Sense Errors UDINT 16#0The number of times when no responseon the carrier sense or no resent duringthe sending of the packets.Frame Too Long UDINT 16#0The number of times when the lengh ofthe received packet exceeds the upperlimit.MAC Receive Errors UDINT 16#0The number of times when an erroroccurs on the packet receiving dueto MAC layer error16#0AInterface LabelGetSHORT_STRING NADefine the Ethernet port nameFor example: AH10EN-5A WhenEthernet port is x2, the expression willbe 02 78 32.Length USINT NA The maximum length of the name is 16characters.Interface name SHORT_STRING NA Use ASCII characters to name theEthernet port name.※1 Interface Flag Table8.12 Vendor Specific Objects8.12.1 X Register (Class ID: 16#350) Service CodeService Code Service NameSupportDescriptionClass Attribute InstanceAttribute16#0E Get_Attribute_Single X V Read one attribute16#32 Read_Parameter X V Read ParameterBit (s) Name Description0 Link Status 0 indicates an inactive link1 indicates an active link1 Half/Full Duplex 0 indicates half duplex1 indicates full duplex2-4 Negotiation Status0：Auto-negotiation in progress1：Auto-negotiation and speed detection failed2：Auto negotiation failed but detected speed3：Successfully negotiated speed and duplex4：Auto-negotiation not attempted. Forced speed and duplex.5 Manual Setting Requires Reset shall be set to zero6 Local Hardware Fault 0 indicates the interface detects no local hardware fault1 indicates a local hardware fault is detected7-31 Reserved 0