A S S e r i e s O p e r a t i o n M a n u a l9 - 1 0 8_99.10.4.2 Data Monitor Table PagesThe setting results are shown as below.Item DescriptionTable name Name of the table; read onlyMonitor statusStatus of the monitoring; read onlyYellow light: reading, Green light: reading complete, Red light:reading errorUpdate cycle Update cycle time; default is what you set up in data monitorsetup page; unit: second“-“ Minus; click once to decrease 1; the minimum value is 1“+“ Plus; click once to increase 1; the maximum value is 60Floating format setting Floating point setting; round down; default: round the numberdown to three decimal placesDevice Devices to be monitored; read onlyRadixPositional numeral system to be shown on the monitoring page;available formats are Signed decimal, Unsigned decimal,Hexadecimal, Octal, Binary, 32bit Signed decimal, 32bitUnsigned decimal, 32bit Hexadecimal, 32bit Octal, 32bit Binary,32bit Float and 64bit DoubleDescription Add a description here for the table; read onlyStatus Status of bit; read onlyGreen LED: ON; No LED: OFFValueValues in devices to be monitored; read onlySigned decimal: K+ NumberUnsigned decimal: K+ NumberHexadecimal: H + hex NumberOctal: O + octal NumberBinary: B + binary Number
