C h a p t e r 1 2 Tr o u b l e s h o o t i n g1 2 - 3 312_12.4.4 Error Codes and LED Indicators for High Speed Counter ModuleAS02HCError code DescriptionERROR LED indicator statusON Blinking16#1605 Counted result in the latched area is not retainable (majorerror) V16#1606 Module settings in the latced area is not retainable. (majorerror) V16#1607 Module setting error(major error) V16#1800 Counter overflow / underflow on CH1 V16#1801 Counter overflow / underflow on CH2 V16#1802 Linear count exceeding the set upper/lower limit on CH1 V16#1803 Linear count exceeding the set upper/lower limit on CH2 V16#1804 The variation in relation to a SSI encoder positionexceeding the limit on CH1 V16#1805 The variation in relation to a SSI encoder positionexceeding the limit on CH2 V16#1806 Abnormal SSI communication on CH1 V16#1807 Abnormal SSI communication on CH2 V16#1808 SSI absolute position cross zero point on CH1 V16#1809 SSI absolute position cross zero point on CH2 V12.4.5 Error Codes and LED Indicators for Load Cell Module AS02LCError code DescriptionERROR LED indicator statusA D ERROR16#1605 Hardware failure (the diver board included) OFF ON16#1607 The external voltage is abnormal. OFF ON16#1801*1 The external voltage is abnormal. OFF Blinking16#1802*1 Hardware failure OFF Blinking16#1807*1 Diver board failure OFF Blinking16#1808 The signal received by channel 1 exceeds the range ofanalog inputs or the SEN voltage is abnormal.RUN: BlinkingSTOP: OFF Blinking16#1809 The signal received by channel 1 exceeds the weight limit.16#180A The factory calibration in channel 1 is incorrect.16#180B The signal received by channel 2 exceeds the range ofanalog inputs or the SEN voltage is abnormal.16#180C The signal received by channel 2 exceeds the weight limit.16#180D The factory calibration in channel 2 is incorrect.*1: The following errors are specified as warnings to ensure the CPU module can still run even when the warnings aretriggered by its AIO modules. You can set up HWCONFIG to have the following first 3 error codes appear as errors whenthey occur.
