C h a p t e r 9 E t h e r n e t S p e c i f i c a t i o n a n d O p e r a t i o n9 - 1 0 99_Item Description32bit Signed decimal: K+ Number32bit Unsigned decimal: K+ Number32bit Hexadecimal: H + hex Number32bit Octal: O + octal Number32bit Binary: B + binary Number32bit Float: float Number64bit Double: float Number“On” / ”Off”“ON”: the status of Bit is ON.“OFF”: the status of Bit is OFF. If the authority level for the logged in user is READ, thiscolumn is read only.Set ValueChange the value for the device to be monitored Type the value in and click “SET” and the changed valueappears in the VALUE column as the image shown above. If the authority level for the logged in user is READ, thiscolumn is read only.“Set”Click “Set” to confirm the changed value. If the authority level for the logged in user is READ, thiscolumn is read only.9.10.5 DiagnosticYou can set diagnostic related configurations here.9.10.5.1 Hardware Status PageThis page displays information on hardware status, CPU module, power module, and function cards. You can set CPU torun or stop. Here also shows the CPU running status and error codes. For AS300, the hardware status page looks like below.
