Delta Components Fanless Box PC 31xx series Manual
                                                              | |
Contents
| 
D E L T A C O M P O N E N T S G m b H Auweg27, D-79761 Waldshut-Tiengen Seite - 34 -board. The board contains two memory banks: Bank 0 and 1, which correspond to connectorDIMM1 and DIMM2. The table below shows possible DIMM Configurations for the memorybanks. Please note that the System Board supports Double Data Rate DDR 200/266/333SDRAM. Configurations using different brands of memory modules are not recommended.Table 3-1: DIMM Configurations of the System Board3.2 Installing DIMMTo install DIMM1. Make sure the two handles of the DIMM sockets are in the “open” position, i.e. the handlesstay outward.Figure3-1: How to Install DIMM (1)2. Slowly slide the DIMM modules along the plastic guides in the both ends of the socket. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine