|
D E L T A C O M P O N E N T S G m b H Auweg27, D-79761 Waldshut-Tiengen Seite - 42 -4.3 Entering SetupWhen the system is powered on, the BIOS will enter the Power-On Self Test (POST) routines.These routines perform various diagnostic checks; if an error is encountered, the error will bereported in one of two different ways:♦ If the error occurs before the display device is initialized, a series of beeps will betransmitted.♦ If the error occurs after the display device is initialized, the screen will display the errormessage.Powering on the computer and immediately pressing allows you to enter Setup.Another way to enter Setup is to power on the computer and wait for the following messageduring the POST:TO ENTER SETUP BEFORE BOOTPRESS KEYPress the key or press the , , and keys to enter Setup:4.4 The Main MenuOnce you enter Award BIOS CMOS Setup Utility, the Main Menu (Figure 1) will appear onthe screen. The main menu allows you to select from ten setup functions and two exit choices.Use arrow keys to select among the items and press to accept or enter the sub-menu.Figure 4-1: BIOS Setup Utility Main Menu
PreviousNext |