A H 5 0 0 O p e r a t i o n M a n u a l8 - 2 1 Method 2(1) Click a slot on which a module will be pasted in the system configuration area or on the informationlist.(2) Click Paste on the Edit menu, or on the toolbar.Additional remarkA module which is cut can only be pasted once. When a module is cut/pasted, the parameters in the moduleare processed as follows. Input/Output device range: The input/output devices assigned to the module cut are automaticallyassigned to the module pasted. Comment about the module: The comment about the module cut is copied into the module pasted. Parameters in the module: The parameters in the module cut are copied into the module pasted. Data registers: The data registers assigned to the module cut are automatically assigned to the modulepasted. Parameters in the intelligent module: The setting of the parameters in the intelligent module is copied.*. Some intelligent modules can be set by means of exclusive configuration tools. Please refer to section 8.3.4 formore information.8.1.2.9 Dragging a ModuleAll modules in the system configuration area can be dragged by the mouse except the CPU module and thepower supply module. Condition 1Drag a module to a vacant slot when the left mouse button is held. The module will be moved to a newposition. Condition 2Drag a module to an occupied slot when the left mouse button is held. The two modules will beinterchanged.* When a module is dragged, the input/output devices assigned to the module, the comment about the module, theparameters in the module, the data registers assigned to the module, and the parameters in the intelligent moduleare also dragged.
