Delta X 100/12 User Manual
                                                                                | |
Contents
| 
Delta X. User Manual42The "Entire" button sets the full range. The "Optimal" button sets the partial range 100 kHz – 6000 MHzfor the 100/12 version of the Delta X. Selection of the partial range helps to speed up the detectionprocess by scanning the most probable bugging frequencies below 6000 MHz.The "Set state of controls" helps to initialize some functions when the detection is started: Turn on Audio Alarm Set Filter to "Dangerous" Turn on Hold Max DangerTo start detecting press the Start button.Within a few seconds, after initialization of the USB connection, detection will start.Detection processIn the RF Sweep mode the software automatically recognizes the signals in the spectrum traces, addsthem to the Signals table and updates the dBm and danger levels. The trace's fetch time depends on theused version of the system:Delta X 2000/6 Real-Time Delta X 100/12 or 100/41.5-3 seconds 1-2 minutesThe Signals are divided into Common signals and Bands. The Bands contain the activities registered inGeneral danger status Logging status The mostdangerous signalChange of danger level in time (allsignals)Current danger Peak danger Wide-Range mode: dangerlevel of all signals is shownsimultaneously |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine