25ENGLISHRDS (Radio Data System)RDS (works only on the FM band) is a broadcasting service which allows station to send additional informationalong with the regular radio program signal.The following three types of RDS information can be received on this unit:2 Program Type (PTY)PTY identifies the type of RDS program.The program types and their displays are as follows:NEWSAFFAIRSINFOSPORTEDUCATEROCK MEASY MLIGHT MCLASSICSOTHER MPHONE INTRAVELLEISUREJAZZCOUNTRYDRAMACULTURESCIENCEVARIEDPOP MWEATHERFINANCECHILDRENSOCIALRELIGIONNATION MOLDIESFOLK MDOCUMENTNews Rock Music Phone InTravelLeisureJazz MusicCountry MusicEasy ListeningMusicLight ClassicalSeriousClassicalOther MusicCurrent AffairsInformationSportsEducation2 Traffic Program (TP)TP identifies programs that carry traffic announcements.This allows you to easily find out the latest traffic conditions in your area before you leaving home.2 Radio Text (RT)RT allows the RDS station to send text messages that appear on the display.NOTE: The operations described below using the RDS, PTY and RT buttons will not function in areas in whichthere are no RDS broadcasts.RDS searchUse this function to automatically tune to FM stations that provide RDS service.231Press the RDS button until “RDSSEARCH” appears on thedisplay.Press the PRESET UP or DOWN button toautomatically begin the RDS search operation.When a broadcast station is found, that station'sname appears on the display.To continue searching, repeat step 3.If no other RDS station is found when all thefrequencies are searched, “NO RDS” is displayed.2(Main unit)34 5If no RDS stations is found with above operation,all the reception band are searched.Drama Weather National MusicOldies MusicFolk MusicDocumentaryFinanceChildren'sprogrammesSocial AffairsReligionCultureScienceVariedPop Music1 Set the input source to “TUNER”.(Main unit) (Remote control unit)(Main unit) (Remote control unit)13PTY searchUse this function to find RDS stations broadcasting a designated program type (PTY).For a description of each program type, refer to “Program Type (PTY)”.2 341Press the RDS button until “PTYSEARCH” appears on the display.Watching the display, press thePTY button to call out the desiredprogram type.Press the PRESET UP or DOWN button toautomatically begin the PTY search operation.The station name is displayed on the display aftersearching stops.To continue searching, repeat step 4.If no other station broadcasting the designatedprogram type is found when all the frequenciesare searched, “NO PROGRAMME” is displayed.2(Main unit)3(Main unit)4If there is no station broadcasting the designatedprogram type with above operation, all the receptionbands are searched.561 Set the input source to “TUNER”.(Main unit) (Remote control unit)(Main unit) (Remote control unit)14