Denon AVR-1603 Operating Instructions Manual

Also see for DHT-483XP: Specifications

Contents

Denon AVR-1603 Operating Instructions Manual Manual pdf 29 page image

29ENGLISH2 Audio section• Power amplifierRated output: Front: 70 W + 70 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)100 W + 100 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)Center: 70 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)100 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)Surround: 70 W + 70 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)100 W + 100 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.)Output terminals: Front: A or B 16 to 16 Ω/ohmsA + B 12 to 16 Ω/ohms or moreCenter/Surround: 16 to 16 Ω/ohms• AnalogLINE input - PRE OUTInput sensitivity/input impedance: 200 mV/47 kΩ/kohmsFrequency response: 10 Hz ~ 100 kHz: +1, –3 dB (TONE DEFEAT ON)S/N ratio: 98 dB (IHF-A weighted) (TONE DEFEAT ON)2 Video section• Standard video jacksInput/output level and impedance: 1 V p-p, 75 Ω/ohmsFrequency response: 5 Hz ~ 10 MHz — +1, –3 dB• S-video jacksInput/output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohmsC (color) signal — 0.286 Vp-p, 75 Ω/ohmsFrequency response: 5 Hz ~ 10 MHz — +1, –3 dB2 Tuner section[FM] (note: μV at 75 Ω/ohms, 0 dBf = 1 x 10–15 W) [AM]Receiving range: 87.50 MHz ~ 108.00 MHz 522 kHz ~ 1611 kHzUsable sensitivity: 1.0 μV (11.2 dBf) 18 μV50 dB quieting sensitivity: MONO 1.6 μ V (15.3 dBf)STEREO 23 μV (38.5 dBf)S/N ratio: MONO 80 dB (IHF-A weighted)STEREO 75 dB (IHF-A weighted)Total harmonic distortion: MONO 0.15 % (1 kHz)STEREO 0.3 % (1 kHz)2 GeneralPower supply: AC 230 V, 50 HzPower consumption: 210 WMaximum external dimensions: 434 (W) x 147 (H) x 417 (D) mmMass: 10.4 kg2 Remote control unit (RC-920)Batteries: R6P/AA Type (two batteries)External dimensions: 55 (W) x 225 (H) x 34.5 (D) mmMass: 165 g (including batteries)For purposes of improvement, specifications and design are subject to change without notice.20 SPECIFICATIONS