Denon AVR-1705 Operating Instructions Manual

Also see for AVR-1705: Operating instructions Product sheet Service manual Service manual Operating instructions

Contents

Denon AVR-1705 Operating Instructions Manual Manual pdf 16 page image

16ENGLISHDENON and other makes of components can be operated by setting the preset memory.This remote control unit can be used to operate components of other manufacturers without using the learningfunction by registering the manufacturer of the component as shown on the List of Preset Codes (pages255~257).Operation is not possible for some models.Preset memory1 Set mode switch 1 to “AUDIO” or “VIDEO”.24 Referring to the included List of Preset Codes, use the number buttons to input thepreset code (a 3-digit number) for the manufacturer of the component whosesignals you want to store in the memory.1 2 34 5 67 8 905 To store the codes of another component in the memory, repeat steps 1 to 4.3214Set mode switch 2 to the component to beregistered.NOTES:• The signals for the pressed buttons are emitted while setting the preset memory. To avoid accidentaloperation, cover the remote control unit’s transmitting window while setting the preset memory.• Depending on the model and year of manufacture, this function cannot be used for some models, even ifthey are of makes listed on the included list of preset codes.• Some manufacturers use more than one type of remote control code. Refer to the included list of presetcodes to change the number and check.• The preset memory can be set for one component only among the following: CDR/MD, DVD/VDPand DBS/CABLE.The preset codes are as follows upon shipment from the factory and after resetting:TV, VCR......................................................................HITACHICD, TAPE ...................................................................DENONCDR/MD ....................................................................DENON (CDR)DVD/VDP ...................................................................DENON (DVD)DBS/CABLE ...............................................................ABC (CABLE)Set the AUDIO side for the CD, Tape deck orCDR/MD position, to the VIDEO side for theDVD/VDP, DBS/CABLE, VCR or TV position.3 Press the ON/SOURCE button and the OFFbutton at the same time.• Indicator flash.REMOTE CONTROL UNIT113213Operating DENON audio components3 Operate the audio component.• For details, refer to the component’s operating instructions.While this remote control is compatible with a wide range of infrared controlled components, somemodels of components may not be operated with this remote control.1. CD player (CD) and CD recorder and MDrecorder (CDR/MD) system buttons2. Tape deck (TAPE) system buttons6, 7 : Manual search(forward and reverse)2 : Stop1 : Play8, 9 : Auto search (cue)3 : PauseDISC SKIP + : Switch discs(for CD changers only)6 : Rewind7 : Fast-forward2 : Stop1 : Forward play0 : Reverse playA/B : Switch between decks A and B• Turn on the power of the different components before operating them.1 Set mode switch 1 to “AUDIO”.2 Set mode switch 2 to the position for thecomponent to be operated. (CD, CDR/MD orTape deck)3. Tuner system buttonsSHIFT : Switch preset channel rangeCHANNEL +, – : Preset channel up/downTUNING +, – : Frequency up/downBAND : Switch between the AM and FMbandsMODE : Switch between auto and monoMEMORY : Preset memoryNOTE:• TUNER can be operated when the switch is at “AUDIO” position.