Denon AVR-1705 Operating Instructions Manual

Also see for AVR-1705: Operating instructions Product sheet Service manual Service manual Operating instructions

Contents

Denon AVR-1705 Operating Instructions Manual Manual pdf 6 page image

R OUTLAUDIO OUTCOAXIALDIGITALLINE OUTSURROUNDSUB WOOFERCENTERFRONTLINE OUTLINE OUTLINE INROUTPUTINPUTL R LR LR LR LLRLRR LRLLRDIGITAL AUDIODIGITAL AUDIOINPUTOUTPUTOPTICALB6ENGLISHConnecting a CD playerConnect the CD player’s analog output jacks (ANALOGOUTPUT) to this unit’s CD jacks using pin plug cords.• Do not plug in the power supply cord until allconnections have been completed.• Be sure to connect the left and right channelsproperly (left with left, right with right).• Insert the plugs securely. Incomplete connectionswill result in the generation of noise.• Use the AC OUTLET for audio equipment only.Do not use them for hair driers, etc.8 CONNECTIONSConnecting the audio componentsConnecting a Tape deckConnections for recording:Connect the tape deck’s recording input jacks (LINE IN or REC) to thisunit’s tape recording (OUT) jacks using pin plug cords.Connections for playback:Connect the tape deck’s playback output jacks (LINE OUT or PB) to thisunit’s tape playback (IN) jacks using pin plug cords.Decoders with 6-channelanalog outputs, etc.Power supply cordAC 230V, 50HzAC OUTLET• SWITCHED (total capacity – 100 W)The power to these outlets is turned on and off in conjunction withthe POWER operation switch on the main unit, and when the poweris switched between on and standby from the remote control unit.No power is supplied from these outlets when this unit’s power is atstandby. Never connect equipment whose total capacity is above 100W.NOTE:Only use the AC OUTLET for audio equipment. Never use them forhair driers, TVs or other electrical appliances.CD recorder, MD recorder or othercomponent equipped with digitaloutput jacks.Subwoofer jackConnect the internal amplifier’s subwoofer to thesubwoofer terminal. (Refer to page 9.)Connecting the AC OUTLETTape deck or CD recorderConnecting the DIGITAL jacksUse these for connections to audio equipment with digital output.Refer to page 15 for instructions on setting this terminal.NOTES:• Use 75 Ω/ohms cable pin cords (sold separately) for coaxialconnections.• Use optical cables (sold separately) for optical connections.CD player• Note that binding pin plug cords together withpower supply cords or placing them near a powertransformer will result in generating hum or othernoise.• Noise or humming may be generated if aconnected audio equipment is used independentlywithout turning the power of this unit on. If thishappens, turn on the power of the this unit.