|
Basic Operation Basic Operation19ENGLISHENGLISHTurning the sound off temporarily (MUTING)Press [MUTING].You can adjust the muting level ( page 42).• Canceling MUTING mode:To cancel the muting mode, either press [MUTING] or adjust thevolume.Connect the headphones to .• No sound is produced from the speakers automatically.NOTE:• To prevent hearing loss, be careful not to raise the volume levelexcessively when using headphones.Listening over headphonesSwitching the front speakersPress to turn the corresponding speaker pairon.The front speaker A, B setting can be also be changed with.Switching the brightness of the displayPress [DIMMER].The brightness of the display can be adjusted in three steps. Thedisplay can also be turned off.Checking the currently playing program source,etc.Press [STATUS].• The current program source and various settings are indicated onthe display.Using the surround modesTypes of surround modes and their featuresThe AVR-1707 is equipped with many surround modes. Werecommend using the surround modes as described below in order toachieve the maximum effect for the specific signal source.is a 6.1-channel/7.1-channel surround mode.Sources recorded in Dolby Digital EXDOLBY DIGITAL EX / +PLIIx* ( page 21)• This mode is optimized for playing sources recorded inDolby Digital EX.Sources recorded in DTS-ESDTS-ES DSCRT 6.1 / MTRX 6.1, +PLIIx* ( page 21)• This is the optimum mode for playing sources recorded inDTS-ES.Dolby Digital or DTS Surround (5.1 ch sources)2 ch sources recorded in Dolby SurroundDOLBY DIGITAL / DOLBY DIGITAL+PLIIx* /DTS SURROUND / DTS 96/24 / DTS+PLIIx* /DTS+NEO:6 ( page 21)• This mode is optimized for playing 5.1-channel or 7.1-channel music.• For Dolby Surround recording sources, Dolby Pro Logic IIplayback is conducted.
PreviousNext |