2ENGLISHENGLISHSpeaker SetupSetting the Speaker Configuration ·········································43, 44Setting the Subwoofer Mode Setup ············································44Setting the Distance ······························································44, 45Setting the Crossover Frequency ················································45Setting the Test Tone ···································································45Troubleshooting ············································································53Additional Information···························································51, 52Specifications ················································································54List of preset codes ············································End of this manualOperating DENON audio components ·······································46Setting the preset memory function ··········································46Operating a component stored in the preset memory ····47 ~ 49Setting the punch through function···········································50Advanced Setup – Part 2Operating the remote control unitAccessoriesCheck that the following parts are attached in addition to the mainunit:q Operating instructions ..............................................................1w Service station list ....................................................................1e Remote control unit (RC-1049).................................................1r R6P/AA batteries ......................................................................2t AM loop antenna ......................................................................1y FM indoor antenna ...................................................................1u Setup microphone (DM-S205) (Approx. 6 m) ...........................1r tueyGetting StartedBefore usingPay attention to the following before using this unit:• Moving the unit.To prevent short-circuits or damaged wires in the connection cables,always unplug the power supply cord and disconnect the connectioncables between all other audio components when moving the unit.• Cautions on using mobile phones.Using a mobile phone near this unit may result in noise. If so, movethe mobile phone away from this unit when it is in use.• Before turning the power operation button on.Check once again that all connections are correct and that there arenot problems with the connection cables. Always set the poweroperation button to the standby position before connecting anddisconnecting connection cables.• Store these instructions in a safe place.After reading, store this instructions along with the warranty card ina safe place.• Whenever the power operation button is in the STANDBY state,the unit is still connected to AC line voltage.Please be sure to turn off the power operation button or unplugthe cord when you leave home for, say, a vacation.• Note that the illustrations in these instructions may differ fromthe actual unit for explanation purposes.System setup items and default values·······························36, 37Navigating through the System Setup items ···························38About the front display································································38Input SetupSetting the Digital In Assignment ················································39Setting the iPod Assignment ······················································39Setting the Component In Assignment ·······································39Setting the Video Convert ····························································40Setting the Audio Delay ·······························································40Setting the EXT. IN Subwoofer Level ·········································40Setting the Auto Preset Memory·················································41Option SetupSetting the Power Amplifier Assignment ····································41Setting the Volume Control··························································42Setting the 2ch Direct/Stereo Custom·········································42Setting the Auto Surround Mode·················································43Advanced Setup – Part 1