Denon AVR-1803 Operating Instructions Manual

Also see for AVR-1803: Brochure & specs Operating instructions Operating instructions Operating instructions

Denon AVR-1803 Operating Instructions Manual Manual pdf 10 page image

ENGLISH1010 SETTING UP THE SYSTEM• Once all connections with other AV components have been completed as described in “CONNECTIONS” (seepages 5 to 9), make the various settings described below on the display.These settings are required to set up the listening room’s AV system centered around the this unit.SYSTEM SETUP buttonPress this to display the system setup on the display.CURSOR buttons (•, ª, 0, 1)Press this change what appears on the display.ENTER buttonPress this to switch the display.Also use this button to complete the setting.• System setup items and default values (set upon shipment from the factory)Input the combination of speakers in your system andtheir corresponding sizes (SMALL for regular speakers,LARGE for full-size, full-range) to automatically set thecomposition of the signals output from the speakers andthe frequency response.Front Sp. Center Sp. Surround Sp. SubwooferLarge Small Small YesSystem setupSpeakerConfigurationThis selects the subwoofer speaker for playing deep basssignals.This parameter is for optimizing the timing with whichthe audio signals are produced from the speakers andsubwoofer according to the listening position.SubwooferModeDelay TimeDefault settingsSet the slide switch to “AUDIO”.1Use the following buttons to set up the system:2Subwoofer mode = NormalFront & Subwoofer Center Surround L & R Surround back3.6 m 3.6 m 3.0 m 3.0 mNOTE:• The system setup is not displayed when “HEADPHONE ONLY” is selected.DigitalInputsInput sourceDigital InAssignmentThis assigns the digital input jacks for thedifferent input sources.COAXIALCDOPTICAL 1 OPTICAL 2DVD/VDP TV/DBSSet the frequency (Hz) below which the bass sound ofthe various speakers is to be output from the subwoofer.CrossoverFrequency 80 HzAuto surround mode function setting.Auto SurroundMode Auto Surround Mode = ONSet the Ext. In Subwoofer channel playback level.Ext. In SWLevel Ext. In SW Level = +15 dBSurround BackSp.SmallOFFVCR-1OPTICAL 3CDR/TAPEOFFVCR-2ComponentInputsInput sourceVideo InAssignmentThis assigns the component video inputjacks for the different video inputsources.VIDEO 1DVD/VDPVIDEO 2 OFFTV/DBS VCR-1OFFVCR-2––OFFV. AUXCheck that all the components are correct, then press the POWER operationswitch on the main unit to turn on the power.Press the SYSTEM SETUP button to enter the setting.Press the ENTER or (down) button to switch to the speakerconfiguration set up.NOTE:Press the SYSTEM SETUP button again to finish system set up. System set up can be finished at any time. Thechanges to the settings made up to that point are entered.123*SYSTEM SET UPBefore setting up the systemNOTE: Please make sure the “AUDIO” position of the slide switch on theremote control unit.(Main unit)Use the (left) and (right) buttons to select your center speaker type.Press the ENTER or (down) button to switch to the surround speaker setting.2 CENTER SMALL LARGE SMALL NONENOTE:• When “Small” has been selected for the front speakers, “Large” cannot be selected for the center speaker.2Setting the speaker configurationUse the (left) and (right) buttons to select your front speaker type.Press the ENTER or (down) button to switch to the center speaker setting.1 FRONT LARGE LARGE SMALL(right) button(left) button1(right) button(left) button(Initial)(Initial)