(L) (R)(A) (B)(L) (R)ENGLISH9FRONT SPEAKER SYSTEMS CENTER SPEAKER SYSTEMSSURROUND SPEAKER SYSTEMS• Precautions when connecting speakersIf a speaker is placed near a TV or video monitor, the colors on the screen maybe disturbed by the speaker’s magnetism. If this should happen, move thespeaker away to a position where it does not have this effect.Connection jack for subwoofer withbuilt-in amplifier (super woofer), etc.To achieve Dolby Digital playbackeffect, use a unit that cansufficiently reproduce frequenciesof under 80 Hz.SURROUND BACK SPEAKERSYSTEMSFollowing the procedure outlined below, insert the batteries before using the remote control unit.Point the remote control unit at the remote controlsensor as shown on the diagram at the left.NOTES:• The remote control unit can be used from a straightdistance of approximately 7 meters, but this distancewill shorten or operation will become difficult if thereare obstacles between the remote control unit andthe remote control sensor, if the remote controlsensor is exposed to direct sunlight or other stronglight, or if operated from an angle.• Neon signs or other devices emitting pulse-type noisenearby may result in malfunction, so keep the set asfar away from such devices as possible.Approx. 7 mq Press as shown by the arrowand slide off.w Insert the R6P/AA batteries properly,as shown on the diagram.e Close the lid.NOTES:• Use only R6P/AA batteries for replacement.• Be sure the polarities are correct. (See the illustration inside the battery compartment.)• Remove the batteries if the remote control transmitter will not be used for an extended period of time.• If batteries leak, dispose of them immediately. Avoid touching the leaked material or letting it come in contactwith clothing, etc. Clean the battery compartment thoroughly before installing new batteries.• Have replacement batteries on hand so that the old batteries can be replaced as quickly as possible when thetime comes.• Even if less than a year has passed, replace the batteries with new ones if the set does not operate even whenthe remote control unit is operated nearby the set. (The included battery is only for verifying operation.Replace it with a new battery as soon as possible.)30°9 USING THE REMOTE CONTROL UNITRange of operation of the remote control unitInserting the batteries30°The same signal is outputsimultaneously to the SURR.BACK A and B terminals.