Specifications1Either turnor press[TUNER]toselect “TUNER”.2Set[SOURCE CONTROL 1]to “AUDIO” and[SOURCECONTROL 2]to “TUNER”.(vpage 65 “Remote Control Unit Operations”)3PressBANDto select “FM” or “AM”.Listening to FM/AM BroadcastsBasic OperationPlaying Video and AudioEquipment1Prepare the equipment.qLoad the BD, DVD, CD or other software in the player.(vSee the operating instructions of the respective equipment.)wTo play a video equipment, switch the monitor input.(vSee the monitor’s operating instructions.)2UseSOURCE SELECTto select the input source.3Start playback.(vSee the operating instructions of the respective equipment.)Basic OperationBANDTUNINGSHIFTopuiSOURCE SELECTSHIFTTUNING[SOURCECONTROL 1][SOURCECONTROL 2][TUNER][SAT TU1/2][CHANNEL+/–]SOURCE SELECTTUNING[MODE][MEMORY][TUNER][SAT TU1/2]BANDuiop[Front][Rear]Button located on both the main unit and the remote controlunitBUTTONButton only on the main unitButton only on the remote control unit[BUTTON]Symbols used to indicate buttons in this manualGetting StartedConnectionsSetupPlaybackRemote ControlMulti-zoneInformationTroubleshootingENGLISHThe remote control unit can be used to operate external devices.See “Remote Control Unit Operations” (vpage 65).4Tune in the desired broadcast station.qTo tune in automatically (Auto Tuning)Press[MODE]to light the “AUTO” indicator on the display, thenuseTUNINGto select the station you want to hear.wTo tune in manually (Manual Tuning)Press[MODE]to turn off the display’s “AUTO” indicator, then useTUNINGto select the station you want to hear.Presetting Radio Stations(Preset Memory)Your favorite broadcast stations can be preset so that you cantune them in easily. Up to 56 stations can be preset.1Tune in the broadcast station you want to preset.2Press[MEMORY].3PressSHIFTto select the block (A to G) in which thestation is to be preset.4Pressor[CHANNEL +/–]to select thepreset number (1 to 8).5Press[MEMORY]again to complete the setting.• To preset other stations, repeat steps 1 to 5.• Stations can be preset automatically at menu “Input Setup” – “AutoPreset” (vpage 39).NOTEPreset stations are erased by overwriting them.• If the desired station cannot be tuned in with auto tuning, tune it inmanually.• When tuning in stations manually, press and holdTUNINGto changefrequencies continuously.• The time (default : 30 sec) for which the on-screen display aredisplayed can be set at “Manual Setup” – “Option Setup” – “On-Screen Display” (vpage 36).Pressuiopto return to the original screen.
