Denon AVR 1909 - AV Receiver Owner's Manual

Also see for AVR 1909 - AV Receiver: Capabilites and Compatibilities Specifications Specifications

Denon AVR 1909 - AV Receiver Owner's Manual Manual pdf 68 page image

Specifications1 Set [SOURCE CONTROL 1] to “AUDIO”.2 Set [SOURCE CONTROL 2] to the position for thecomponent to be operated (CD, iPod/NETWORK orTUNER).3 Operate the audio component.b For details, refer to the component’s operating instructions.b While this remote control is compatible with a wide range ofinfrared controlled components, it may be the case that somecomponent models cannot be operated with this remote control.1 Set [SOURCE CONTROL 1] to “AUDIO” or “VIDEO”.b Set to the AUDIO side for the CD position, and to the VIDEO sidefor the DVD/HDP, VCR, SAT/CABLE or TV position.2 Set [SOURCE CONTROL 2] to the component to beregistered.3 Press [ZONE2 OFF] and [MAIN ON] at the same time.The indicator starts flashing.4 Press [NUMBER] and input the 3-digit number of thebrand of the component to be preset. The numbersare shown in the Preset Code Table (vEnd of thismanual).5 To store the codes of another component in thememory, repeat steps 1 to 4.• The signals for the pressed buttons are emitted while setting thepreset memory. To avoid accidental operation, cover the remotecontrol unit’s transmitting window while setting the presetmemory.• Depending on the model and year of manufacture, this functioncannot be used for some models, even if they are of makes listed inthe list of preset codes.• Some manufacturers use more than one type of remote control code.Refer to the included list of preset codes to change the number andverify correct operation.• The preset memory can be set for one component only among thefollowing: DVD/HDP and SAT/CABLE.• VDP (Video Disc Player) can be preset when [SOURCE CONTROL 2]is set to “DVD/HDP”.1 Set [SOURCE CONTROL 1] to “AUDIO” or “VIDEO”.b Set to the AUDIO side for the CD position, and to the VIDEO sidefor the DVD/HDP, VCR, SAT/CABLE or TV position.2 Set [SOURCE CONTROL 2] to the component you wantto operate.3 Operate the component.b For details, refer to the component’s operating instructions.b Some models cannot be operated with this remote control unit.Operating DENON Audio ComponentsPresetting• DENON and other makes of components can be operated bysetting the preset memory.• Operation is not possible for some models.Operating Preset ComponentsDepending on the model and year of manufacture of your equipment,some buttons may not operate.[SOURCECONTROL 1][SOURCECONTROL 2]Main Remote Control Unit(RC-1099)[ZONE2 OFF][NUMBER][MAIN ON][Front][Rear]Getting Started Connections Setup Playback Remote Control Multi-zone Information TroubleshootingENGLISHRemote Control Unit Operations