Denon AVR-2106 Operating Instructions Manual

Also see for AVR-2106: Operating instructions Control protocol Brochure & specs Operating instructions Service manual

ENGLISH16ENGLISHConnecting Other Sources Connecting Other SourcesNOTE:• Do not connect two FM antennassimultaneously.• Even if an external AM antenna isused, do not disconnect the AMloop antenna.• Make sure the AM loop antennalead terminals do not touch metalparts of the panel.Note to CATV system installer:This reminder is provided to call theCATV system installer’s attention toArticle 820-40 of the NEC whichprovides guidelines for propergrounding and, in particular, specifiesthat the cable ground shall beconnected to the grounding system ofthe building, as close to the point ofcable entry as practical.Direction of broadcastingstation75 Ω/ohmCOAXIALcableFM antennaFM indoorantenna(Supplied)AM loopantenna(Supplied)AM outdoor antennaGroundAn FM antenna cable plug can be connected directly to the unit.Connecting the antenna terminals142 32 AM loop antenna assemblyConnect to the AMantenna terminals.Remove the vinyl tieand take out theconnection line.Bend in the reversedirection.a. Antenna placed ona stable surface.b. Hanging theantenna on a wall.MountUse theinstallation hole to secure the antenna to a wall, etc.Connection of AM antennas1. Push the lever.2. Insert the conductor.3. Return the lever.Connecting the XM terminalXM Connect-and-Play AntennaFXM• AVR-2106 is the XM Ready® receiver. You can receive XM Satellite Radio® by connecting to theXM Connect-and-Play™ (sold separately) and subscribing the XM service.• Plug the XM Connect-and-Play antenna into XM terminal on the rear panel.• Position the XM Connect-and-Play antenna near a south-facing window to receive the best signal.For details, see “XM Satellite Radio” ( page 32).When making connections, also refer to the operating instructions of the XM Connect-and-Playantenna.NOTE:• Keep the power supply cord unplugged until the XM Connect-and-Play antenna connectionhave been completed.