ENGLISH21Basic Operation Basic OperationENGLISH2 Input mode display• In the AUTO mode• In the DIGITAL PCM mode• In the DIGITAL DTS mode• In the ANALOG modeDepending on the input signal.2 Input signal display• DOLBY DIGITAL• DTS• PCMThe “DIGITAL” indicator lightswhen digital signals are being inputproperly. If the “DIGITAL” indicatordoes not light, check whether theDigital In Assign. setup ( page42) and connections are correct andwhether the component’s power isturned on.NOTE:• The “DIGITAL” indicator will light when playing CD-ROMscontaining data other than audio signals, but no sound willbe heard.STANDARD SELECTSURROUND PARAMETERSTEREO/DIRECT/PURE DIRECTSURROUNDPARAMETERSTEREOSTANDARDDIRECT/PURE DIRECTCURSORENTERPlaying audio sources (CDs and DVDs)2-channel playback modes• The AVR-2106 is equipped with 2-channel playback modesexclusively for music.• Select the mode to suit your tastes.Press the STEREO/DIRECT/PURE DIRECT button onthe main unit or the DIRECT/PURE DIRECT buttonon the remote control unit to select the DIRECTmode.2 DIRECT modeUse this mode to achieve good quality 2-channel sound whilewatching images. In this mode, the audio signals bypass suchcircuits as the tone circuit and are transmitted directly, resultingin good quality sound.SurroundPress the STEREO/DIRECT/PURE DIRECT button onthe main unit or the STEREO button on the remotecontrol unit to select the STEREO mode.2 STEREO modeUse this mode to adjust the tone and achieve the desired soundwhile watching images.Press the STEREO/DIRECT/PURE DIRECT button onthe main unit or the DIRECT/PURE DIRECT buttonon the remote control unit to select the PURE DIRECTmode.2 PURE DIRECT modeUse this mode to achieve good quality 2-channel sound whilewatching images. In this mode, the audio signals bypass suchcircuits as the tone circuit and display circuit and are transmitteddirectly, resulting in good quality sound.