282. PANEL/REMOTE LOCK Selection mode2.1. Behavior specificationsIn this mode, you can switch between the PANEL LOCK MODE and the Mode for preventing remote control acceptance.2.2. Starting upPress the "Power operation (X)" button to turn on power while pressing the "ZONE2/REC SOURCE" and "TUNERPRESET CH +" buttons.Press the "TUNER PRESET CH +" button to select the mode and the "STATUS" button to confirm the selection.2.3. Mode selection method and how each mode is displayedEach time you press the "TUNER PRESET CH +" button, the mode displayed on the FL DISPLAY changes.While the desired mode name is displayed on the FL DISPLAY, press the "STATUS" button. The set is restarted and theselected mode takes effect.The currently set item is marked with " ＊ ".qFLD F P / V O L L O C K O nOperations using the main unit panel buttons and the mastervolume knob are rejected.wFLD F P L O C K O nOperations using the main unit panel buttons are rejected.eFLD F P L O C K * O f fPanel lock mode is cancelled.rFLD R C L O C K O nOperations using the remote control are rejected.tFLD R C L O C K * O f fRC lock mode is cancelled.
