Denon AVR-2313CI Service Manual

Also see for AVR-2313: Getting started

Contents

Denon AVR-2313CI Service Manual Manual pdf 8 page image

8TECHNICAL SPECIFICATIONSn Audio Section• Power amplifierRated output (for 2313CI model) :Front :105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)Center :105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)Surround :105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)Surround back:105 W + 105 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.)135 W + 135 W (6 Ω, 1 kHz with 0.7 % T.H.D.)Output connectors : 6 – 16 Ω• AnalogInput sensitivity/Input impedance : 200 mV/47 kΩFrequency response: 10 Hz – 100 kHz — +1, –3 dB (DIRECT mode)S/N : 100 dB (IHF–A weighted, DIRECT mode)n Video section• Standard video connectorsInput/output level and impedance : 1 Vp-p, 75 ΩFrequency response : 5 Hz – 10 MHz — 0, –3 dB• Color component video connectorInput/output level and impedance : Y (brightness) signal — 1 Vp-p, 75 ΩPB / CB signal — 0.7 Vp-p, 75 ΩPR / CR signal — 0.7 Vp-p, 75 ΩFrequency response : 5 Hz – 60 MHz — 0, –3 dBn Tuner section(Note: μV at 75 Ω, 0 dBf = 1 x 10–15 W)Receiving Range (for E3 model) :87.5 MHz – 107.9 MHzUsable Sensitivity :1.2 μV (12.8 dBf)50 dB Quieting Sensitivity :MONO 2.8 μV (20.2 dBf)S/N :MONO 70 dB (IHF–A weighted, DIRECT mode)STEREO 67 dB (IHF–A weighted, DIRECT mode)Total harmonic Distortion :MONO 0.7 % (1 kHz)STEREO 1.0 % (1 kHz)n GeneralPower supply (for E3 model) : AC 120 V, 60 HzPower supply (for E2 model) : AC 230 V, 50/60 HzPower supply (for E1C model) : AC 220 V, 50 HzPower consumption : 600 WPower consumption in standby mode : 0.1 WPower consumption in CEC standby mode : 0.5 WPower comsumption in network standby mode : 2.7 WWeight : 10.9 kg4343446086.035.8 30.2338.518.51521671554.0 214.522.0245DIMENSION[AVR-2313CIE3 model]