Denon AVR-2805 Operating Instructions Manual

Also see for AVR-3805: Control protocol Service manual Service manual Operating instructions Operating instructions

17ENGLISH1-6 Check the EQ parameter• The frequency characteristic of each speaker is rectified and the tone of the speaker is unified.The EQ parameters that were set in Auto Setup can be checked.This item is automatically displayed, after the measurement result of the “Auto Setup / Room EQ” is decided.1 Select “EQ Parameter Check” at the Auto Setup / RoomEQ Menu.2 Display the EQ Parameter Check screen.(Remote control unit)(Remote control unit)3 Select the Equalizer curve.4 Dislay the parameter screen.5 Select the speaker channel.7 If the check ends, select “Exit”and press the ENTER button.The Auto Setup / Room EQMenu reappears.8 Select “Exit” and press theENTER button at the Auto Setup/ Room EQ Menu screen.The System Setup Menureappears.(Remote control unit)(Remote control unit)P a r a m e t e r C h e c k* A u t o S e t / R o o m E Q1 : N o r m a l* P a r a m e t e r C h e c k(Remote control unit)(Remote control unit)(Remote control unit)6 Enter the setting.(Remote control unit)(Remote control unit)(Remote control unit)