Denon AVR-390 Owner's Manual

Also see for AVR-390: Service manual

Denon AVR-390 Owner's Manual Manual pdf 26 page image

Getting Started Connections Setup Information TroubleshootingENGLISHSpecificationsPreparations1 Connect the power cord.The power indicator lights red and the power is set to thestandby mode.2 Press or [POWER ON].The power indicator flashes green and the power turns on.b Also press INPUT SELECT when in standby mode, the powerturns on. In this case the input source is selected by remotecontrol unit.Turning the Power OffPress or [POWER OFF].The power is set to the standby mode.NOTEPower continues to be supplied to some of the circuitry even whenthe power is in the standby mode. When leaving home for longperiods of time or when traveling, unplug the power cord from thepower outlet.Turning the Power OnSelect the source using INPUT SELECT.The input source changes as follows each time you press

.VCR DVDV.AUXThe input source changes as follows each time you press

.CD AUXCD-R / TAPEThe input source changes as follows each time you press.FM MONO AMFM STPress to select “EXT. IN”.Switching between Digital Audio Inputand Analog Audio InputWhen a single source is connected by both digital and analogconnectors, this enables you to change the audio input methodwith one button.PlaybackPress DIGITAL INPUTS.Each time this button is pressed, the corresponding input is selectedas follows:VCR : O(ptical)DVD : C(oaxial) 1 A(nalog)CD : C(oaxial) 2zz Displays the connected terminal name.NOTE• When TUNER, AUX, CD-R / TAPE, EXT. IN or V.AUX is selected asan input source, the analog input is selected automatically.• When the selected digital input is not connected, the analog inputis automatically selected.• The sound from the component connected to the selected digitalinput can be heard regardless of the selected input source.Selecting the Input SourceButton located on both the main unit and the remotecontrol unit BUTTONButton only on the main unit