Connections Setup Playback Information TroubleshootingENGLISH SpecificationsInserting the BatteriesNOTE• Replace the batteries with new ones if the set does not operateeven when the remote control unit is operated close to the unit.• The supplied batteries are only for verifying operation.• When inserting the batteries, be sure to do so in the proper direction,following the “q” and “w” marks in the battery compartment.• To prevent damage or leakage of battery fluid:• Do not use a new battery together with an old one.• Do not use two different types of batteries.• Do not attempt to charge dry batteries.• Do not short-circuit, disassemble, heat or dispose of batteries inflames.• If the battery fluid should leak, carefully wipe the fluid off the insideof the battery compartment and insert new batteries.• Remove the batteries from the remote control unit if it will not be inuse for long periods.• When replacing the batteries, have the new batteries ready andinsert them as quickly as possible.30°30°Approx. 7 mOperating Range of the Remote ControlUnitPoint the remote control unit at the remote sensor when operatingit.NOTEThe set may function improperly or the remote control unit may notoperate if the remote control sensor is exposed to direct sunlight,strong artificial light from an inverter type fluorescent lamp or infraredlight.About the Remote Control Unitq Lift the clasp and remove the rear cover.e Put the rear cover back on.R03/AAAw Load the two batteries properly as indicatedby the marks in the battery compartment.Getting Started