Denon AVR-4802 Operating Instructions Manual

Also see for AVR-4802: Brochure & specs Control protocol Service manual

Denon AVR-4802 Operating Instructions Manual Manual pdf 43 page image

43Fader function• This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together.Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources.1 MAIN UNIT:Press the CH VOL button, and select“FADER”.REMOTE CONTROL UNIT:Select “FADER”.The channel switches in the order shown below each timethis button is pressed.2The fader function does not affect the SW channel.The channel whose channel level is adjusted lowest can be fadedto –12 dB using the fader function.If the channel levels are adjusted separately after adjusting thefader, the fader adjustment values are cleared, so adjust the faderagain.This is only displayed when setting the fader control.FL C FR SR SBR SBLSLSWFADERMAIN UNIT:Turn the SELECT knob clockwise toadjust the volume of the surround sidecollectively. Turn the CONTROL knobcounterclockwise to adjust the volumeof the front side collectively.REMOTE CONTROL UNIT:Press the CURSOR/PAGE button on the“SURROUND 2/5” page to highlight thedisplay. The channel (speaker) switchesas shown on the diagram below eachtime it is pressed.REMOTE CONTROL UNIT:Move jog stick “ENTER” to the top sideto adjust the volume of the surround sidecollectively.Move jog stick “ENTER” to the bottomside to adjust the volume of the front sidecollectively.SELECT(Main unit)212 1CH VOL(Main unit)(Remote control unit)(Remote control unit)(Remote control unit)