Denon AVR-4802 Operating Instructions Manual

Also see for AVR-4802: Brochure & specs Control protocol Service manual

Denon AVR-4802 Operating Instructions Manual Manual pdf 54 page image

54Tone control setting• Use the tone control setting to adjust the bass and treble as desired.1 Display the surround parameterscreen on the monitor.The screen for the selectedsurround mode appears.“TONE” cannot be selected inthe Direct or Home THX Cinemamode.2 Press the CURSOR/PAGE button tohighlight the display, then use thejog stick to set the parameters.Select “TONE”.3 Switch to the Tone Control screen.4 If you do not want the tone to be adjusted, set “Tone Defeat” to “ON”.(See page 35.)B To select Bass or Treble. B To set the level.5 Enter the setting.The surround menu screen re-appears. 6 Press the CURSOR/PAGE button so thatthe display is no longer highlighted, thenpress the “SURR. PARA” button tocomplete the setting.2, 3, 4, 51, 66(Remote control unit)(Remote control unit)(Remote control unit)(Remote control unit)(Remote control unit)(Remote control unit)(Remote control unit)• To operate the tone control from the main unit.1 The tone switches as follows each time the TONE CONTROL button is pressed.TONECONTROL2 With the name of the volume to be adjusted selected, turn the SELECT knob to adjust the level.• To increase the bass or treble:Turn the control clockwise. (The bass or treble sound can be increased to up to +12 dB in steps of 2 dB.)• To decrease the bass or treble:Turn the control clockwise. (The bass or treble sound can be decreased up to –12 dB in steps of 2 dB.)SELECT(Main unit)(Main unit)1 TREBLE0BASS