Denon AVR-4802 Operating Instructions Manual

Also see for AVR-4802: Brochure & specs Control protocol Service manual

Denon AVR-4802 Operating Instructions Manual Manual pdf 71 page image

7117 SPECIFICATIONS2 Audio section• Power amplifierRated output: Front: 125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)150 W + 150 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)Center: 125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)150 W + 150 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)Surround: 125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)150 W + 150 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)Surround Back 125 W + 125 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)/Multi: 150 W + 150 W (6 Ω/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)Dynamic power: 170 W x 2 ch (8 Ω/ohms)270 W x 2 ch (4 Ω/ohms)350 W x 2 ch (2 Ω/ohms)Output terminals: Front/Center/Surround Back: 6 ~ 16 Ω/ohmsSurround: A or B 6 ~ 16 Ω/ohmsA + B 8 ~ 16 Ω/ohms• AnalogInput sensitivity / input impedance: 200 mV / 47 kΩ/kohmsFrequency response: 10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)S/N: 105 dB (DIRECT mode)Distortion: 0.005% (20 Hz ~ 20 kHz) (DIRECT mode)Rated output: 1.2 V• DigitalD/A output: Rated output — 2 V (at 0 dB playback)Total harmonic distortion — 0.005% (1 kHz, at 0 dB)S/N ratio — 110 dBDynamic range — 108 dBDigital input: Format — Digital audio interface• Phono equalizer (PHONO input — REC OUT)Input sensitivity: 2.5 mVRIAA deviation: ±1 dB (20 Hz to 20 kHz)Signal-to-noise ratio: 74 dB (A weighting, with 5 mV input)Rated output / Maximum output: 150 mV / 8 VDistortion factor: 0.03% (1 kHz, 3 V)2 Video section• Standard video jacksInput / output level and impedance: 1 Vp-p, 75 Ω/ohmsFrequency response: 5 Hz ~ 10 MHz — +0, –3 dB• S-video jacksInput / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohmsC (color) signal — 0.286 Vp-p, 75 Ω/ohmsFrequency response: 5 Hz ~ 10 MHz — +0, –3 dB• Color component video terminalInput / output level and impedance: Y (brightness) signal — 1 Vp-p, 75 Ω/ohmsP B/CB (blue) signal — 0.7 Vp-p, 75 Ω/ohmsP R/CR (red) signal — 0.7Vp-p, 75 Ω/ohmsFrequency response: DC ~ 50 MHz — +0, –3 dB2 Tuner section[FM] (note: μV at 75 Ω/ohms, 0 dBf = 1 x 10–15 W) [AM]Receiving Range: 87.5 MHz ~ 107.9 MHz 520 kHz ~ 1710 kHzUsable Sensitivity: 1.0 μV (11.2 dBf) 18 μV50 dB Quieting Sensitivity: MONO 1.6 μV (15.3 dBf)STEREO 23 μV (38.5 dBf)Signal to Noise Ratio (IHF-A): MONO 79 dB 50 dBSTEREO 74 dBTotal Harmonic Distortion (at 1 kHz): MONO 0.15%STEREO 0.3%2 GeneralPower supply: AC 120 V, 60 HzPower consumption: 10.5 AMaximum external dimensions: 434 (W) x 179 (H) x 485 (D) mm (17-3/32” x 7-3/64” x 19-3/32”)Mass: 20.5 kg (45 lbs 3.1 oz)2 Remote control unit (RC-8000)Batteries: LR6/AA Type (four batteries)External dimensions: 96 (W) x 38 (H) x 168.5 (D) mm (3-25/32” x 1-1/2” x 6-41/64”)Mass: 242 g (Approx. 8.5 oz) (not including batteries)* For purposes of improvement, specifications and design are subject to change without notice.

/ 72

Related manuals for Denon AVR-4802