Denon AVR-5803 Operating Instructions Manual

Also see for AV Surround Receiver AVR-5803: Setup guide Reference guide Specifications Operating instructions Service manual

Contents

Denon AVR-5803 Operating Instructions Manual Manual pdf 7 page image

7Connecting the audio components• When making connections, also refer to the operating instructions of the other components.SPEAKER SYSTEMSANTENNA TERMINALSMULTIZONE 2SURR.-BSURR.-ACENTERCONPONENT VIDEOFRONTSURR.BACKRRRRRRLRLRLRL SPEAKER SYSTEMSSPEAKER IMPEDANCEFRONT, CENTER, SURR. BACKMULTI ZONE 2SURROUND A OR B / 6 16ΩA + B / 8 16Ω/ 6 16ΩAC OUTLETSSWITCHED TOTAL 120W (1A.) MAX.AC 120V 60HzMULTIZONE 2SURR.-BSURR.-AFRONTSURR.BACKLLLLLIN DVDYVDP TV DBS / V. AUX VCR-1 VCR-2 VCR-3 VCR-1 VCR-2 VCR-3 1 2SAT1VIDEOS-VIDEOOUTOUT OUTINININ EXT. IN-1SW1 2 EXT. IN(REMOTE CONTROL)ROOM TO ROOMDENONLINKPOWER AMPRS-232C TRIGGER OUTDC 12V 20mA MAX.OPTICALDIGITAL3 4 51 2 3 4 5 6 5 6EXT. IN-2 PRE OUT OUT PREOUT OUTOUTIN OUTAUDIO INMONITORDVDVDP TV DBS / V. AUX VCR-1 VCR-2 VCR-3 VCR-1 VCR-2 VCR-3SAT MD /AC INTAPE-2CDR /TAPE-1MD / MULTI ZONETAPE-2 1 2CDR /TAPE-1DVDCENTER SURR. SURR.BACK SURR.BACK SURR.BACKFRONT CENTER SURR.FRONTDOLBY DIGITAL RFCENTER SURR.FRONTPHONOSIGNALGNDCDMULTI ZONEIN TVYIN DBS / SATYOUTMONITORP B /C B P R /C RP B /C B P R /C RP B /C B P R /C RP B /C B P R /C R YAMLOOPFMCOAX.75ΩANT.COAXIALCONTROL OUTOUTININSW SWROUTPUTLR LDIGITAL AUDIODIGITAL AUDIOR L R LOUTPUT INPUTR L R LR L R LOUTPUT INPUTR L R LOUTPUT INPUTOPTICALCOAXIALOUTPUTOPTICALDIGITAL AUDIODIGITAL AUDIOBRLRLRL RLRLRLBCD playerConnecting a CD playerConnect the CD player’s analogoutput jacks (ANALOG OUTPUT) tothis unit’s CD jacks using pin plugcords.Connecting a turntableConnect the turntable’s output cord to the AVR-5803’s PHONO jacks, theL (left) plug to the L jack, the R (right) plug to the right jack.NOTE:This unit cannot be used with MC cartridges directly. Use a separatehead amplifier or step-up transformer.If humming or other noise is generated when the ground wire isconnected, disconnect the ground wire.Turntable(MM cartridge)Ground wireExtension jacks for future useAC cord(Supplied)Connecting the pre-out jacksUse these jacks if you wish to connect external power amplifier(s) toincrease the power of the front, center, surround and surround back soundchannels, or for connection to powered loudspeakers.When using only one surround back speaker, connect it to left channel.Connecting the AC OUTLETSAC OUTLETS• SWITCHED(total capacity – 120 W (1 A.))The power to these outlets is turned on and off in conjunction with the POWERswitch on the main unit, and when the power is switched between on andstandby from the remote control unit.No power is supplied from these outlets when this unit’s power is at standby.Never connect equipment whose total capacity is above 120 W (1 A.)NOTE:Only use the AC OUTLETS for audio equipment. Never use them for hair driers,TVs or other electrical appliances.AC outlets (wall)AC 120V, 60HzMD recorder, DAT deck or other componentequipped with digital input/output jacksCD player or other component equippedwith digital output jacksConnecting the DIGITAL jacksUse these for connections to audio equipment with digital output.Refer to page 29 for instructions on setting this terminal.NOTES:• Use 75 Ω/ohms cable pin cords for coaxial connections.• Use optical cables for optical connections, removing the cap before connecting.Connecting a tape deckConnections for recording:Connect the tape deck’s recording input jacks (LINE IN or REC) to thisunit’s tape recording (OUT) jacks using pin plug cords.Connections for playback:Connect the tape deck’s playback output jacks (LINE OUT or PB) to thisunit’s tape playback (IN) jacks using pin plug cords.CD recorder or Tape deck 1 MD recorder or Tape deck 2Denon Link terminalUse this terminal to connect a Denon DVD player for high quality digitalmultichannel sound.For details, refer to the DVD player’s operating instructions.DIGITAL EXT. INExtended function for future use.