Denon AVR-787 Operating Instructions Manual

Also see for AVR-787: Service manual Service manual Specifications Dimensions

Contents

Denon AVR-787 Operating Instructions Manual Manual pdf 20 page image

Connecting Other Sources Connecting Other Sources17ENGLISHENGLISHConnecting a CD recorder or MD recorder• If you wish to perform analog dubbing from a digital source, such as a CD or MD recorder to an analogrecorder such as a tape deck, you will need to connect the analog inputs and outputs as shown below,in addition to the digital audio connections.• If you choose to use the coaxial or optical connection, it needs to be assigned. For more informationabout Digital Input Assignment ( page 47).RLAUDIO INRLAUDIO OUTCD recorder /MD recorderOPTICALOUTOPTICALINRLRLARLRLADDNOTE:• Do not connect the output of the component connected to the OPTICAL 2 OUT terminal on the AVR-787’s rear panel to any terminal other than the OPTICAL 2 IN terminal.142 3¢ AM loop antenna assemblyConnect to the AMantenna terminals.Remove the vinyl tieand take out theconnection line.Bend in the reversedirection.a. With the antenna ontop any stablesurface.b. With the antennaattached to a wall.MountInstallation hole Mount on wall, etc.An F-type FM antenna cable plug can be connected directly.Connecting the antenna terminalsDirection of broadcasting station75 Ω/ohms Coaxial cableFM antennaFM indoor antenna (Supplied)AM loop antenna(Supplied)AM outdoor antennaGroundConnection of AM antennas1. Push the lever.2. Insert the conductor.3. Return the lever.• The source selected for MAIN ZONE is output from the digital output terminal (OPT-2).The source selected in the REC SELECT mode is not associated with the output from the digital outputterminal (OPT-2).