|
Basic Operation Basic Operation33ENGLISHENGLISHListening to the radioCheck that the remote control unit is set to “AUDIO”.Hold •> and press .• The unit automatically begins searching for FM broadcaststations.When the first FM broadcast station is found, that station isstored in the preset memory at channel A1.Subsequent stations are automatically stored in order at presetchannels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1 to E8, F1 toF8 and G1 to G8 for a maximum of 56 stations.Channel A1 is tuned in after the auto preset memory operation iscompleted.Auto preset memoryThis unit is equipped with a function for automatically searching forFM broadcast stations and storing them in the preset memory.• If an FM station cannot be preset automatically due to poor reception,use the “Manual tuning” operation to tune in the station, then presetit using the manual “Preset memory” operation.• To interrupt this function, press .Switch off the unit using .12About the button names in this explanation< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only :Buttons on the main unit and remote control unitCHANNEL[FM/AM]SHIFT[ON SCREEN][TUNER]TUNING[MODE]BAND[MEMORY] CHANNELSHIFT •> TUNINGBAND Use to select “TUNER” or press[TUNER].Auto tuningManual tuningPress [MODE] to set the auto tuning mode.• The “AUTO” indicator lights.Press TUNING.• Automatic searching begins.• If tuning does not stop at the desired station, use to the “Manualtuning” operation.• “AM” or “FM” can be selected directly by pressing [FM/AM].Use to select “TUNER” or press[TUNER].Press [MODE] to set the manual tuning mode.Check that the display’s “AUTO” indicator turns off.Press BAND to select “AM”, “FM” or “XM”.When listening to the XM Satellite Radio ( page 34, 35).Press BAND to select “AM”, “FM” or “XM”.When listening to the XM Satellite Radio ( page 34, 35).Press TUNING.The frequency changes continuously when the button is held in.12341234• When the manual tuning mode is set, FM stereo broadcasts arereceived in monaural and the “STEREO” indicator turns off.• “AM” or “FM” can be selected directly by pressing [FM/AM].
|
