Denon AVR-990 Owner's Manual

Also see for AVR-990: Specification Before Upgrading Guide Getting started Service manual Service manual

Contents

Denon AVR-990 Owner's Manual Manual pdf 17 page image

Getting Started Settings Playback Remote ControlZONE2 Information Troubleshooting SpecificationsENGLISHSelect the terminal to use and connect the device.For video connections, see “Converting Input Video Signals for Output (Video Conversion Function)”(vpage 9).••*/7*%&0$0.10/&/57*%&0: 1# 137*%&0*/47*%&0*/MonitorTo listen to TV audio through this device, use the optical digital or analog connection.Connecting the MonitorConnecting DevicesFor instructions on HDMI connections, see “Connecting Devices Equipped with HDMI Terminals” onpage 13.NOTEIf the GUI menu “Audio Out” setting (vpage 35) is set to “AMP”, the sound may be interrupted whenthe monitor’s power is turned off.The audio signal from the HDMI output terminal (sampling frequency, number of channels, etc.) may belimited by the HDMI audio specifications of the connected device regarding permissible inputs.••Connecting to a Device Equipped with a DVI-D TerminalWhen an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are convertedto DVI signals, allowing connection to a device equipped with a DVI-D terminal.NOTENo sound is output when connected to a device equipped with a DVI-D terminal. Also make the audioconnections.Signals cannot be output to DVI-D devices that do not support HDCP.Depending on the combination of devices, the video signals may not be output.n•••Settings Related to HDMI ConnectionsSet as necessary. For details, see the respective reference pages.Input Assign (vpage 44)Set this to change the HDMI input terminal to which the input source is assigned.HDMI Setup (vpage 35)Make settings for HDMI video/audio output.RGB RangeAuto Lip SyncNOTEThe audio signals output from the HDMI connectors are only the HDMI input signals.nn••Audio OutHDMI Control••Connections